Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Older 220 volt wire
[ 13 Answers ]
I have an older 220v wire with only 3 wires... 2 hot and 1 ground/neutral (bare). I need to connect (splice) it to a newer 220v wire with 4 wires... 2 hot, 1 neutral (white), and a ground (bare). And older I mean less than 15 years old.
220 volt 2-wire with ground
[ 7 Answers ]
My new electric wall oven has a 3-wire with ground (black, red, white & ground). The previous oven was attached to the current circuit which is #10 2-wire with ground (black, white, ground). How do I make this connection to run both the 110v & 220 volt components on the new oven?
Splicing 220 volt 6 ga. Wire
[ 1 Answers ]
:confused: In regards to question asked by 1936 roadster on oct.7 2007 @ 11:34pm. I have a 220 volt 50 amp. 6 ga. 4 conductor electric wire that is about 6 feet to short to reach new location. Does the nec permit in line splices? Do they have to be staggered? Do they have to be enclosed. This line...
Hard wire 3 wire to 4 wire 220 service
[ 1 Answers ]
How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?
240 volt four wire in 240 three wire outlet
[ 1 Answers ]
I have a generator that has (2) 20 amp 110 outlets and (1) 240 outlet. The 240 outlet have receptacle for four wire plug but I want to use it in a three 930 wire 240 volt plug at other end. Is this a workable solution? View more questions Search
|