Ask Experts Questions for FREE Help !
Ask
    burrodlb's Avatar
    burrodlb Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 6, 2008, 07:30 PM
    Craftsman Tractor will not start
    My tractor will not start. I have a 19.5 horsepower tractor that is about 6 years old. I need to drain the gas tank. I think used 91 octane instead of 89. DO you think draining the tank and putting the appropriate octane gas will fix the problem. How do I drain the tank and where can I get a owners manual?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Apr 7, 2008, 07:52 PM
    Well you could have water in your tank, drain the tank, lines, and fuel bowl off the carb, and change the fuel filter.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 16.5hp lawner tractor won't start [ 33 Answers ]

Hope you experts out there can give me some clues before I become desperate and turn to a pro. Here is some info about the tractor and what I have done so far: This is a 1999 Kohler electric start 42' mower, bought new in 2001, model 917.271141. I have replaced oil filter, air filter/screen,...

Craftsman lawn tractor model 917270910 won't start [ 7 Answers ]

I have a Craftsman Lawn tractor model number 917270910. It will not start. I tried a new battery even though the one on it checked out okay. It will not even turn over. I replaced the fuse but the original looked fine. What else should I do?

Craftsman lawn tractor B&S 18.5 hp crank no start [ 7 Answers ]

Getting mower ready for first time use this year. It will make a revolution when tried to start, but that's it. Normal maintenance was performed, changed oil, plug, air filter, charged battery. Tried jumping the rider with my truck, same result. Tried jumping the starter directly, same result....

Craftsman lawn tractor won't start [ 2 Answers ]

I have a LT 2000 lawn tractor,3 years old I cut it off and it won't do anything, no noise when ignition switch is turned on I have 12 volts to the solenoid, I replaced the solenoid, still does not do anything Please help


View more questions Search