Ask Experts Questions for FREE Help !
Ask
    snookerfred's Avatar
    snookerfred Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 5, 2008, 09:49 AM
    Car won't start
    Hi,I have a rover 420 2,ooo ltre fuel injection,lead came off starter,repaired it,but won't start,breakdown said the starter was faulty,but replaced,turns over but won't fire,thanks fred
    ddollinger's Avatar
    ddollinger Posts: 145, Reputation: 12
    Junior Member
     
    #2

    Apr 11, 2008, 02:49 PM
    Fred,

    If it is turning over then your starter is not the issue unless it is turning over so slowly that it won't catch.

    That being said you need a starting point. You need 3 things for an engine to start: Fuel, Air, and Fire. Check and make sure you are getting fuel, make sure your intake system isn't plugged and make sure your getting spark. If you have those 3 things and it still won't start then it gets into more serious analysis. 85% of the time, one of those 3 things are missing.

    If you are not getting fuel then obviously you will look into your fuel system. Is the fuel pump working? Is there a clogged fuel line or filter? Are your fuel injectors working properly?

    Air is pretty simple, pull your air filter and see if it will start then.

    If it is not firing then you need to look at your ignition system. Am I getting no spark or a very weak spark? If so then why? Are any components bad (i.e. wires, cap, plugs, rotor, coil, internal components)?

    If you have checked all of those things and they are fine and it still won't start post back.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1993 toyota camry won"t start [ 10 Answers ]

My 1993 toyota camry was running great and all of a sudden it just quit running. My preliminary test indicates that it is not getting spark to the plugs. How do I test the distributor, ignition coil, igniter, cap & rotor, etc. It is a 4 cylinder engine

Troy built pony mower won't start [ 2 Answers ]

Troy built pony riding moerw stalled when the bade bearing frioze up, changed bearinf housind ,blade and belt ,will not even click the starter--where is the blade safety swith located so I can check it ?

Bought a used duerr chipper and it won start [ 2 Answers ]

I bought a used chipper that hasn't been used but a few times I know thi becaue I know the old owner he didn't have a manuel for it but now it just won't start I know it set up a couple of years any ideas what's wrong

1993 toyota camry won"t start [ 2 Answers ]

My 1993 toyota camry was running great and all of a sudden it just quit running. My preliminary test indicates that it is not getting spark to the plugs. How do I test the distributor, ignition coil, igniter, cap & rotor, etc.


View more questions Search