Ask Experts Questions for FREE Help !
Ask
    Hdhawk94's Avatar
    Hdhawk94 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 5, 2008, 08:00 AM
    Pressure Balance Valve: Integral Stops
    What is an integral stop on a pressure balance valve and how do I know if I need one?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Apr 5, 2008, 09:01 AM
    Integral stops or screwdriver stops are slotted shut off valves located at the point where the valve connects to the supplies. They are there so you don't have to shut the entire house down to service the valve. Regards, tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pressure Balance/Rough-In Valve ? [ 1 Answers ]

I'm doing a bath remodel and will install a pressure balance/rough-in valve. The valve can be purchased with or without stops. What are the stops used for? Are stops really necessary?

Is a pressure balance valve required for a hand shower on a whirlpool tub top? [ 6 Answers ]

We installed a whirlpool tub in our master bath with a Grohe Roman Tub Filler.(25 506) I went for the model with separate hot and cold handles (no temperature control or pressure balance) because it could fill the tub much faster (30+ gallons). The filler also has a hand shower with an internal...

Water Pressure Valve and Ball Valve [ 1 Answers ]

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.

Pressure balance valve [ 1 Answers ]

Dear All I need to know about the principle of function of the pressure balance valve used in North America and Canada. I think it's only advantage is to keep the water pressure coming out for the faucet constant, but how does it do it? What is the inner component responsible of implementing...

Sloan Valve Stops [ 3 Answers ]

I changed a couple of sloan valves on toilets at my church Friday night. Not a bad job and cuts the cost considerably. Simply shut the water off, open the tp and pull out the insides and drop in a new A-38-A Retro water saver kit. Both of the old ones had considerable hard, mineral deposits on...

View more questions Search