Remote thermostate for gas fireplace

charmel Posts: 1, Reputation: 1

New Member

Mar 29, 2008, 03:09 PM

Remote thermostate for gas fireplace

I have a propane gas fireplace and have a remote thermostat and it is not functioning correctly. It will not cut off.

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Mar 29, 2008, 04:14 PM

Replace battery's?

Add your answer here.

Check out some similar questions!

Does gas emit in the house when pilot light of gas fireplace goes out? [ 2 Answers ]

I have a gas fireplace and on a windy day the pilot light actually went out. My dad said that even though the pilot light isn't on it's emitting gas into the house- which is a health hazard, but I thought that as long as the switch that turns on the light is off there is no risk. Can anyone tell me...

No gas supply, or faulty valve in gas fireplace? [ 4 Answers ]

We use a regency Gr55-3 ~20,000btu gas fireplace for heating our bedroom. Its about 10 years old and has given us no trouble before. The gas supply line is a small (3/8"?) flexible copper tube that runs about 40' from a prv. I believe the prv lets pressure down from 2psi to a few inches of...

Gas Piping Question about gas fireplace [ 5 Answers ]

Hello all, I'm not sure whether to ask this question in the heating forum or here, but it seems to be more a piping question. I am installing a gas fireplace. I got it used, and pieced it together from two sources, meaning I'm needing to change a few things. The burner I got was configured...

Gas fireplace [ 1 Answers ]

I have a gas firleplace in my apt, when it is on, it produces the smell of exhaust and faint natural gas. The apt tells me it is the 'unvented' kind and that is normal. I disagree; it should be odorless. What is the underlying problem? Am I at risk?

Gas line to a gas fireplace [ 1 Answers ]

I have an existing gas fireplace place in my home that I moved 1'0" to the right. There is a copper tubing with a shut off and then flex tubing connecting to the fireplace. I am trying to add additional copper tubing on to the existing so I can extend everything to reach the new location for the...