Ask Experts Questions for FREE Help !
Ask
    palacios46's Avatar
    palacios46 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 28, 2008, 03:05 PM
    Craftsman riding mower
    I have a craftsman 15.5hp b/s motor and it keeps back firing can any body help with this problem do I have to set the gap on the spark plug if so what is the gap also how dfo I find the right belts for my mower thank you palacios46
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Mar 28, 2008, 04:14 PM
    Palacios, you are just not having very good luck are you. will the engine start?
    tacodawg's Avatar
    tacodawg Posts: 9, Reputation: 1
    New Member
    		  
    #3

    Mar 29, 2008, 08:19 PM
    Not sure about the back fire part,but I found replacement belts on-line and e-bay for my Lt1000 rider.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Riding mower [ 4 Answers ]

I Have A Craftsman Riding Mower With A 15.5 Hp Briggs And Stratton And I Was Cutting The Lawn And It Was Running Great. It Started Acting Up... running Rough, So I Shut It Off And Checked All The Fluids And The Were Fine. I Replaced The Plug And There Was Still No Change. When The Air...

Diagram for replacing lawn mower belt on Sears Craftsman 4000 Riding Mower [ 9 Answers ]

I need a diagram on how to replace a belt on the Sears Craftsman II 4000 riding mower

Craftsman Riding Mower [ 6 Answers ]

I Have A Craftsman 11 Hp Riding Lawn Mower That Won't Even Crank.I Have A Good Battery Clean Posts,power To The Starter But When I Push Clutch In To Crank,nothing Happens.what Am I Doing Wrong?

Craftsman 13.5 HP Riding Mower [ 1 Answers ]

When I stick key in ignition I get nothing. I have already replaced the battery, spark plug, still nothing. Barcroft

New Craftsman Riding Mower [ 1 Answers ]

We just purchased a new Craftsman 26HP, 54" cut, riding mower. One of the front wheels does not point straight ahead, it is pointing inward. When we called the help desk, we were told it was engineered this way so that the mower would make tighter turns. Is this true? (The steering wheel is...

View more questions Search