Why does an inducer motor gets blocked

gbeaucluche Posts: 1, Reputation: 1

New Member

Mar 26, 2008, 09:14 AM

Why does an inducer motor gets blocked

Why does an inducer motor gets blocked

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Mar 26, 2008, 12:31 PM

Usually because something is in the pipe.

Add your answer here.

Check out some similar questions!

Furnace inducer motor [ 5 Answers ]

What are the implications of a furnace inducer motor drawing high Amps?

Inducer Motor Problems [ 6 Answers ]

I have a Goodman Gas Furnace installed in 1997 and have been experiencing the following problems: The usual run for the furnace has been inducer motor on, ignition (with flames), and then the blower motor comes on. I have been having the inducer motor come on, run for about three minutes,...

Goodman Inducer Motor [ 18 Answers ]

Inducer Motor Direction [ 2 Answers ]

I have a Carrier WeatherMaker 8000 and my inducer motor goes in the opposite direction when furnace is not running. Could this cause a mis-firing. Without consistency I get a code 14 or 34 when furnace fails to work. Completed a component test and all seems well. Help.

Problem with inducer motor which just went out. [ 3 Answers ]

Hello everyone, this is my first question on this forum. I hope that some of you can help me out with this query, as I'm literally out in the cold right now. My inducer motor just went out on our central a/c heating unit. It's a York rooftop model. I am wondering if someone could guide me as to...