Ask Experts Questions for FREE Help !
Ask
    SFryar's Avatar
    SFryar Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 24, 2008, 09:05 PM
    Maytag Washer won't do anything but fill
    Maytag Dependable Care Washer Model#LAT9314AAE.
    Washer will fill with water, but will not do anything else.
    We already replaced the timer, and the lid switch seems to be working properly.
    Any suggestions??
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    Mar 24, 2008, 09:36 PM
    Do you hear any noises like the motor running or other noises after it fills?
    SFryar's Avatar
    SFryar Posts: 2, Reputation: 1
    New Member
     
    #3

    Mar 25, 2008, 04:03 AM
    Thanks Doug. No. We don't hear anything at all. The timer will advance (click) through it's stages, but the washer doesn't do anything. No buzzing, no humming, no smoke, no funny smells... nothing. We tried adjusting the lid switch, but that did not help. Is there a way to bypass the lid switch? Or maybe an easy way to check what the problem is?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #4

    Mar 25, 2008, 05:19 AM
    Yes, you can jumper around the switch. I would next check for power at the motor. Do you have a voltmeter and know how to use it? YOu should have an electrical diagram inside the console that will show you how the power runs to the electrical components.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirpool washer won't fill [ 3 Answers ]

My 13 yr. old Whirpool washer LA9500XTW1 stopped mid-cycle with the tub full of water. After trying several times to restart by pushing/pulling knob, it started and completed the cycle including rinse and spin, without any problem. But now I can't get it to start a new load on any part of any...

Whirlpool washer LA 5600xs won't fill [ 1 Answers ]

Whirlpool washer LA 5600xs will not fill up. Only a trickle of water runs into the machine.

Whirlpool washer will not fill up [ 1 Answers ]

My new whirlpool washing machine attempts to fill up - but never does - the water just keeps pumping?/siphons? Out

Washer stops after fill [ 1 Answers ]

I have a 2 year old Kenmore washer that suddenly will not start after it fills. I have to keep spinning the dial and pushing it in/pulling it out several times, then it starts. Once it does start, everything works fine. It has not been moved or had any problems before this.

Maytag Washer: Water fill intermittent [ 1 Answers ]

I have a Maytag washer, model number LAT9400AAW; washer is approx 14 yrs old. My problem is that the water fill is intermittent. Sometimes the water fills appropriately, other times the water stops filling, for both hot and cold water. When the water does stops filling intermittently, I hear a...


View more questions Search