Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Height of roof vent
[ 7 Answers ]
My mother ( does not live close to me) is complaining of a smell in her basement around the area where there is a basement sump pump to pump out water that may seep into the basement. There was a service person out today and they told her it was most likely because the roof vent was not high...
Avoiding a new hole in the roof for a plumbing vent
[ 1 Answers ]
I added a new addition to my house. In it I want to put a sink and washing machine drain but I don't want to vent them through the roof as it is unsightly and at the front of the house. Can I tie in through the attic to an existing vent that already goes through the roof and still achieve the...
How to Drop Roof Vent
[ 3 Answers ]
The inspector says that the waste vent shown here has to be dropped to a minimum of 12" from the roof. How do I do this?
Plumbing vent to roof
[ 1 Answers ]
While trying to run a snake down the roof vent, the darn thing came completely out of the spindle and the snake fell down the vent. Now I have 14' of snake down the darn vent and can't see the free end. Is there some obvious tool I can find or rent that will allow me to fish the thing out? ...
Vent out roof question
[ 1 Answers ]
Hello all. I had a question about the vent coming out of the roof. In my kitchen, I have a cathedral ceiling framed with 2 x 12 joists. I was planning on bringing a vent from behind my sink straight up through the roof. I have a 18" overhang, and this will place the vent close to the edge of... View more questions Search
|