Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Intertherm Electric Furnace Blower works in "on" not in "auto"
[ 6 Answers ]
I have an Intertherm Electric Furnace E2EB-015AH. I came home from work last night, turned the heat on and it didn't work as advertised. I could hear the relays clicking occasionally so I investigated a little and found the elements are heating up and cycling, the relay inside the thermostat cycles...
General electric washer problems
[ 9 Answers ]
I have an older model ge washing machine. It washes fine and agitates well also but when it comes to spinning the clothes out it does not do a very good job. The clothes are still quite wet when it finishes. Most times it has to be spun out 3 or 4 times to get even close. Also when it is spinning...
Wiring 240 electric baseboard heaters with 2 pole thermostat. PROBLEMS ENCOUNTERED.
[ 5 Answers ]
Howdy all, I have looked at the previous postings as I frequent the site for help on subjects. I am however perplexed as to what I have done wrong. I am installing 4 electric heaters, on 2 separate 240 breakers. Each breaker is 30 AMP. I used 12/2 Red Heat resistant wire and ran the line...
Frigidaire Electric Dryer belt problems
[ 3 Answers ]
I've had a Frigidaire electric dryer for 5 1/2 years.( model # FDEB23RGS1) Back in December, the belt broke and I bought a replacement at an appliance supply store. Electrolux makes the belt and it says on the package that it's made for Frigidaire dryers.(Appliance Parts from Repairclinic.com -...
Electric problems for 1st time buyer?
[ 2 Answers ]
I am about to buy my 1st home, a small apartment. A row of recessed wall lights are not working in the proposed property. All other electrics appear to be OK (except the bottom cylinder in an immersion heater). In the absence of any explanation by the seller and no possibility of re-entering the... View more questions Search
|