Ask Experts Questions for FREE Help !
Ask
    stoneljen's Avatar
    stoneljen Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 16, 2008, 01:24 PM
    new thermostat
    I have a braeburn 1200 the set up is
    red = r
    orange = o
    blue = c
    yellow = y
    green = g
    white = w2 and is jumped to e
    the new thermostat is a hunter 44260 it has
    g
    rc jumped to rh
    y/o
    w/b
    y1

    The instructions do not help
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 16, 2008, 04:12 PM
    Quote Originally Posted by stoneljen
    I have a braeburn 1200 the set up is
    red = r
    orange = o
    blue = c
    yellow = y
    green = g
    white = w2 and is jumped to e
    the new thermostat is a hunter 44260 it has
    g
    rc jumped to rh
    y/o
    w/b
    y1

    The instructions do not help

    For old 1200 series Braeburn

    Old Terminal from New Terminal for
    Existing Thermostat New Thermostat Terminal Description
    R, V-VR or VR-R R 24 VAC
    O O Reverse Valve (Cooling)
    B B Reverse Valve (Heating)
    C, X or B C 24 VAC common
    Y, Y1 or M Y 1st Stage Compressor
    E E Emergency Heating
    G or F G Fan Control
    W1, W2 or W-U W2 2nd Stage / Aux Heating[/B]


    The new Hunter thermostat will not work for a heat pump.

    I believe you have the wrong thermostat for your application.

    Hunter is also junk in my opinion. Get a good Honeywell or White Rodgers heat pump unit instead.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Mar 17, 2008, 10:41 AM
    Yep,, it's the wrong tstat if its got Hunter wrote on it
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
    		  
    #4

    Mar 17, 2008, 11:32 AM
    Howstuffworks "Thermostat Wiring"

    Replacing A Plain Thermostat With A Setback Thermostat
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

System does not react to thermostat, thermostat set to off, AC still runs. [ 3 Answers ]

We had a new AC system put in this summer. I turned it off as the weather moderated, but even though the thermostat is set to off, the AC runs. It also looks like the heat does not run. It was chilly last night and I turned the thermostat to heat on and set the temperature appopriately, but no...

Thermostat turns on furnace and then thermostat shuts back to HOLD [ 7 Answers ]

I believe that when we re-run the program with the correct date and time, if the temp has to go up, the furnace runs until it gets the appropriate temp, then it turns off and when it does that, the thermostat also turns off going to the HOLD state.:confused:

Replacing Analog Thermostat with Non-Programmable Digital Thermostat [ 1 Answers ]

Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!

Hooking up a new thermostat but old thermostat has a white and a black wire? [ 2 Answers ]

Everything I look at indicates a white and red wire for the connecting wires. Our thermostat is probably original to our home (1943). It has two wires. It is difficult to tell but it looks like one is a white wire and the other is black. I've tried looking on the internet for some info however...

View more questions Search