Ask Experts Questions for FREE Help !
Ask
    maxbuilt's Avatar
    maxbuilt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 16, 2008, 07:59 AM
    Troy-built mowers
    How do you change a mower blade on a troy-built model 34345?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Mar 16, 2008, 11:10 AM
    Remove spark plug wire, better yet remove the spark plug completely, hold the blade and use a wrench to remove the bolt.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Mar 16, 2008, 06:09 PM
    MM:
    I don't like the wrench idea without a little more info. More specifically, I'd recommend a 6-pt socket at a minimum. 12 pt wrenches have a tendency to round off the heads, so use a 6 pt wrench.

    Preventing the blade from spinning can sometimes be done my holding the blade. Occasionally you'll have to wedge a piece of wood between the blade and the housing.

    Otherwise, mm suggestions are spot on.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Repair troy built [ 1 Answers ]

Troy built model 556- lost ability to engage self propelled feature. The cable is fine I took apart the housing attached to the handle and need to close it up . Are there any diagrams that will show me the correct way to place the line within the housing

Troy Built Mower [ 2 Answers ]

Where is the bolt to change the oil found?

Troy Built Horse [ 1 Answers ]

Blade engage goes off after 3or4 seconds. I must turn off and start again, 3or4 seconds goes off again.

Troy built fuses [ 1 Answers ]

I think I need to change the fuses on my troy built mower/tractor. How do I check to see if they need to be changed? How do I change them? How do I know what fuses to buy?

View more questions Search