Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bathroom custom shower stall
[ 1 Answers ]
How do I build a custom seat into a custom shower stall?
Installing a custom shower stall
[ 1 Answers ]
Hi all, I ripped out an old shower stall from the basement of my house. I am left with a drain location of 18 x 18 inches from the corner. I would like to install a custom shower area that would be larger then the 36 x 36 shower I had. I cannot find a shower pan that is 48 x 36 to 42 inches with a...
Shower door and curb
[ 1 Answers ]
I have a shower, with a swing out alumax shower door, the sweep feel apart. The bottom of the shower door enclosure has been leaking. The top of the curb Is a clay or cement material which is wet. The wall board below the is wet and the tlie has Fallen off. What do I replace the clay...
Custom shower stall construction
[ 3 Answers ]
Hello, Could you give me specific steps to build custom shower base - what is the best membrane to install in the shower base, how to do it as well how to attach it to shower drain Thanks Bogdan
Turning walking shower stall into bathtub/shower combo.
[ 4 Answers ]
Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line... View more questions Search
|