Ask Experts Questions for FREE Help !
Ask
    napalapa's Avatar
    napalapa Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 6, 2008, 10:14 AM
    Washer Kenmore Elite Catalyst 110.20092993 F3 F4 error codes
    The washer won't work, just display these error codes but I don't know whar what that means
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
    		  
    #2

    Mar 6, 2008, 11:31 AM
    The F3 code has to do with the lid switch, make sure it is operating o.k. The F4 code has to do with the

    Recirculating pressure switch. (black hose). Make sure the hose is not plugged. Check the wires to the

    Pressure switch. Or you have a failed switch. Your pressure switchs are undernieth the console, you should

    Find the tech sheet under there to help you out..

    [url]https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/106d19d1437eb1eb85256ab000622c81/$FILE/4322673.pdf

    Copy and paste this link in address bar --- press GO
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Washer error codes [ 5 Answers ]

I have a Kenmore Elite front load washer/dryer that are stacked. The washer goes through the sequence of steps to wash a load of clothes, but when it gets to the spin cycle, it begins to beep and alert and blinks HF on the screen. If I try to cancel and start it again, you can hear water begin to...

Kenmore Elite Washer Error Codes [ 2 Answers ]

What does error code OL mean on a Kenmore Elite Washer?

Kenmore Elite Catalyst Washer [ 1 Answers ]

My Kenmore Elite Catalyst Washer with digital display was not spinning. I replaced the coupler, the old one was worn. The washer did spin however it made a whinning noise. I ran several loads and now it will not spin again. Any suggestions on what the problem may be? Thanks.

View more questions Search