Ask Experts Questions for FREE Help !
Ask
    bellantbell8087's Avatar
    bellantbell8087 Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 1, 2008, 09:49 AM
    Plumbing: low pressure
    I have low cold water pressure on one side of house. Master bed room is fine but kitchen and guess bed room pressure very low
    bellantbell8087's Avatar
    bellantbell8087 Posts: 2, Reputation: 1
    New Member
     
    #2

    Mar 1, 2008, 09:51 AM
    I have very low pressure with cold water from kitchen to guest bed room. In master bed room pressure is fine. What is the problem.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Mar 1, 2008, 05:07 PM
    Hi Bellantbell... tell me is this isolated to cold only in these fixtures or by chance is hot water effected as well?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low water pressure causing high blood pressure [ 1 Answers ]

I have low or no hot water pressure to the downstairs bathroom. I've replaced the cartridges, valves and hot water heater, still no pressure... help.

High pressure at sink, low pressure at shower [ 2 Answers ]

Hello, My sink in the bathroom has good solid water pressure. Next in the circuit is the toilet, which also has good pressure at the angle valve. The shower, however has terrible pressure. I have removed the head, and the pressure out of the shower neck is no better. Shower neck exits the...

Plumbing, low water pressure [ 13 Answers ]

I have a new home with a pressure regulator. When set at 50 psi the flow at all locations is very weak. When set higher the flow is acceptable. The plumber says it must be set at 50psi. The flow at this setting is much weaker than normal (normal being virtually any other location, our last...

Low Pressure and Low Flow Water Supply [ 4 Answers ]

I recently moved into a house that is about 6 years old. The house sits upon a small hill. The water pressure is 40 psi at the street and the flow rate is 13 gpm. At the house, the pressure is about 30 psi and the flow rate is 3.5 gpm. The house is higher than the street level, but the...

Low water pressure in an area known for high pressure [ 3 Answers ]

Greetings, My wife and I are in the process of updating 1957 side by side split level. The previous owner (OK, my Mom as I bought the house I grew up in from her) said that when they moved in they had to install a pressure reducer into the line. I have searched high and low but, I can't see...


View more questions Search