Ask Experts Questions for FREE Help !
Ask
    kyjeff3030's Avatar
    kyjeff3030 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 25, 2008, 07:55 PM
    Kenmore Elite HE3 Electric dryer won't heat
    I have cleaned the lent traps and made sure there is good air flow with no obstructions in the vent. I have replaced the heating element and it still will not heat. Frustrated, can anyone tell me the nest step. Should I replace the High-limit thermostat. Thanks
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Feb 25, 2008, 08:07 PM
    YOu Should test componets before condeming and replacing. Test the limit switch to see if it bad. Do you have access to a multimeter and know how to use it?
    kyjeff3030's Avatar
    kyjeff3030 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Feb 26, 2008, 06:42 AM
    Yes I can borrow one from my neighbor. I will check the thermal cutoff and the thermostat.
    Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Poor heat in kenmore elite he3 dryer [ 2 Answers ]

Hello, I have a kenmore elite he3 front load dryer about 6 years old, it does not seem to heat up as much as it has been, could it be one of the heating elements is out or temp sensor is not working properly, is it a DIY jobber? Many thanks for your help knwng

Kenmore elite HE3 electric dryer won't heat. [ 1 Answers ]

Any suggestions on repair? Air blows strong out of vent. Everything seems to work fine just no heat

Kenmore Elite Electric Dryer Does Not Heat Up [ 1 Answers ]

My Kenmore electric dryer does not heat up like it should. The dryer gets warm and eventually dries the clothes, but it's taking 3 times as long.

Kenmore Elite HE3 Electric Dryer [ 1 Answers ]

My dryer turn off all by itself. An error code of E1 appears. We press start/cancel and start the dryer again. After a few minutes it shuts off again displaying the error code once again. Help... :eek:

View more questions Search