Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Sub panel install
[ 2 Answers ]
I want to install a sub panel in my garage mainly for Christmas decorations. I have an unused 220 out let in the garage, that I was thinking I could use to feed the sub panel. However it was installed by the previous owner, and I am not sure what circuit it goes to in the main panel. My assumption...
Breaker size in main panel to support sub panel?
[ 7 Answers ]
Hello, I am wiring a sub-panel to the outside of my home (50 feet from main 200 amp box). I ran 3 wire - 6 gauge. What is the largest 2 pole breaker I can put in the main panel to supply the sub-panel. TYPE NM-B 6-3 WITH GROUND 600 VOLTS CIRTEX-I EZ-STRIP (R) PLUS 17:11 2/5/07 SB/RC ...
Sub-Panel install
[ 1 Answers ]
I'm in the process of some mild renovation and I'm going to need to install a few new circuits at the opposite end of the house than the main panel is. The path the cable has to take to get there is rather complicated, I was thinking it might be easier to run one larger cable and set up a sub-panel...
Hampton Bay Ceiling Fan need instructions on how to install
[ 2 Answers ]
I have a Hampton Bay Ceiling Fan that is 10 years old and has never been used. It also doesn't have the instruction manuel detailing how to install it. Is there anyway to get that information?:confused:
Detached garage panel install, please help
[ 2 Answers ]
Hi, I am running 8-3 underground in pvc conduit and am wondering: 1. How high up the garage wall I should come up before entering the garage (I guess this means how high the panel will be on the inside as well)? Any code for this or is whatever height is comfortable good enough? 2. Also, I... View more questions Search
|