Ask Experts Questions for FREE Help !
Ask
    TIGERTED's Avatar
    TIGERTED Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 21, 2008, 09:08 PM
    Heat trap nipple
    How do I check heat/change trap nipple
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Feb 23, 2008, 05:55 AM
    Quote Originally Posted by TIGERTED
    How do i check heat/change trap nipple
    I just change them out with a 3/4" brass nipple. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bleeding nipple [ 11 Answers ]

Really scared Just had a baby - did not breastfeed and now have bleeding from right nipple only Got to go to cancer clinic for tests - very worried! Any advice

Replace P-trap with drum trap--good idea? [ 3 Answers ]

Hi, I have a large crack in a cast iron waste line. The line at that point serves just the kitchen sink and is vented to the roof. The first plumber I called wants to disconnect the P-trap, install a drum trap, drill through the cabinet and floor, and connect to the waste line down below the crack....

Heat trap working properly? [ 1 Answers ]

I recently installed a new gas water heater with factory installed heat traps. Everything works fine, but the other day I noticed that the cold water supply was warm to the touch. This only happens when the burner is on, and the pipe is warm for only the first three or four inches coming from the...

Nipple inverted [ 1 Answers ]

I have a inverted nipple that seems to be getting move inverted. And nipple with what looks like warts with a bit of a discharge. It does itch at times. Does any one have any thing similar?

P-trap GAP - p-trap too low to meet sink drain extension [ 13 Answers ]

I just took an old crane drexel sink off the wall and replaced it for the time being ( I want to fix the older sink) with a cheap vanity/sink set. All that was easy enough, but now to my chagrin I can't finish the job. The p trap is too low, the extension pipe from the sink doesn't go all...

View more questions Search