Ask Experts Questions for FREE Help !
Ask
    obricko's Avatar
    obricko Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 19, 2008, 04:30 PM
    What should the temp be out of my register for my heater?
    I'm trying to make sure my heater is running properly. I was wondering if someone could tell me what the temprature of the air coming out of my register from a new gas furnace should be. Outside temprature is around 14 degrees.

    Thanks in advance.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 19, 2008, 04:59 PM
    That will depend on the temperature of the air temp entering the return air
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hot water heater - settings for temp [ 1 Answers ]

I have a State select 50 gallon water heater. I have it set approx 3/4 way to the hottest setting. The hot water does not seem to last that long or get that hot. Where should the setting be for this type of hot water heater? Typical 3/2 home with 4 occupants. Water does have to travel...

My heater does not get to set temp [ 1 Answers ]

:confused: I just moved into this trailer.. it has a digital hunter thermostat I don't know how to set it the landlord tried and it shuts off before it gets to temp how do I program this thing or what do I do?? Please help me I'm freeeeeeezing

Luke warm temp from gas hot water heater [ 13 Answers ]

About 6 days ago, we suddenly only had luke warm water from all our hot water faucets. I called the hot water heater help line and they sent me a new thermostat. I had a friend (who is a pro) install the thermostat, and still no hot water. I can see the pilot is lit. I can hear a constant "roar"...

Heat not kicking on until the temp dips below 64 degrees, target temp set to 72 [ 2 Answers ]

Hello, This is my first time posting here, but I figured it was a good place to start for some advice. I just bought a new townhouse a few weeks ago and have been having some heating issues since moving in. The actual furnace (Goodman GMS 8045) was installed in June of '06 while the unit was...

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

View more questions Search