Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding subpanel
[ 8 Answers ]
Hello Everybody, I am new here and hope that someone would be able to help me with this first question. I am remodeling and would like to add a subpanel braker to the second story. The subpanel will be a 100 amp-double braker. What wire size should I use, and do I need to run it inside...
BATCH files silent install or unassisted install?
[ 3 Answers ]
Hello, :confused: I have many application's that I install at my place of employment. These applications have been packaged into a .exe, I currently install these apps VIA Batch files as there are many prerequisites required to install before installing the application itself i.e.. Oracle 9 etc....
Basement subpanel.
[ 1 Answers ]
Thanks in advance for all help involved in my endeavors... First off let me start by saying this is an old home built in 1959 and has all fusible circuits.. The home was somewhat upgraded as far as I can tell in the 70`s with an exterior meter panel with breaker space for extra circuits,but by and...
Some subpanel questions
[ 1 Answers ]
My winter project is to build a 12x20 shed in the far corner of the back yard. I'd like to run electric service for lights and power tools. On the outside of the house about 30' from the main panel I have a 240V pullout switch that at one time supplied an AC compressor (since relocated to the...
Adding subpanel
[ 6 Answers ]
I have a 200A main panel in my garage and want to install a subpanel in my basement to feed 4 circuits (15 & 20 A). The best route I can find for the feeder wire is through the garage in conduit, then entering the basement through the concrete foundation. I have a couple of questions. 1. If I... View more questions Search
|