Ask Experts Questions for FREE Help !
Ask
    russharv63's Avatar
    russharv63 Posts: 65, Reputation: 1
    Junior Member
    		  
    #1

    Feb 16, 2008, 05:01 PM
    Can"t understand code from my ford taurus!
    I have a 1993 ford taurus 3.8L V6 automatic GL. I retrieved this code from my car: code 634, manual lever position sensor voltage higher or lower than expected or A/C on. I got the code from a "innova ford OBD 1 digital code reader." What does this code mean?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Feb 16, 2008, 05:41 PM
    Quote Originally Posted by russharv63
    I have a 1993 ford taurus 3.8L V6 automatic GL. I retrieved this code from my car: code 634, manual lever position sensor voltage higher or lower than expected or A/C on. I got the code from a "innova ford OBD 1 digital code reader." What does this code mean?
    Here's the pin-out tests for that code:

    Name: 1a.gif Views: 789 Size: 19.1 KB

    If the tool you're using doesn't align, you will probably need a new switch.
    Otherwise, further close inspection and hands-on diag will be necessary to be certain.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

94 ford taurus [ 2 Answers ]

Where is the speed sensor located ?

Possessed Ford Taurus [ 4 Answers ]

I have a 1999 Ford Taurus that is possessed. My battery is being drained overnight. I replaced the battery, the alternator, the negative cable, have removed and cleaned and SCUFFED up the negative grounds on the vehicle. We have with a multimeter checked the fuses both under the dash and the...

Ford taurus [ 4 Answers ]

I have a 1996 ford taurus not a bad car we had no major trouble until now .It ran out of gas and now I have to crank it many times before it finally starts and it keeps on stalling for the first 20 to 25 start,every time it starts it runs a little better for a few seconds then stalls again I keep...

1998 ford taurus [ 1 Answers ]

I own a 1998 ford taurus. I am experiencing a problem with my vehicle when the speedometor is not working the car will not shift gears. But when the speedometer is working the car shifts fine. I recently changed the speed sensor and still have the same problem.

91 ford Taurus [ 3 Answers ]

I have No Power going to the Starter Headlights or Brake Lights is there a grounding strap or something that could be the problem PLEASE HELP

View more questions Search