 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Shower and diverter issue
Shower and diverter issue:
I have the hot/warm water off the tub spout. However, when I pull the diverter up for the shower function, the water turns cold within 30-6- seconds. Any idea what might be happening? Thanks for your help. Sung |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
In my bathtub shower too much water comes out the bath faucet when I pull up the water diverter to shower leaving insufficient water going to the shower head. How do I fix this?
A plumbing problem that we can't seem to get a grip on: When we turn the shower knob, the water still runs out of the tub spout. There was initially a piece missing (black rubber gasket type fitting) from the back of the diverter assembly, but now that this piece has been added the assembly either...
I have 4 showers in my house 1 downstairs and 3 upstairs. Two of the 3 upstairs have stopped having hotwater in them, shower A is a tub shower combined unit and has no hot water in it, shower B is a shower only with a jetted tub in the same bathroom but not single unit. The shower in B has no hot...
Water is coming from both the tub spout and shower head in both showers. They are both delta faucets. We have replaced one diverter valve to see if that was the problem, however, no difference. The faucet is a single lever faucet with a push in diverter. Any suggestions?
The water in my shower comes out mostly from the tub faucet and not the shower faucet (which I assume is a problem with the diverter) but what I don't understand is that the water pouring out of the tub end is scalding hot, while the water coming out of the shower end is only warm. Then they both...
View more questions Search
|
