Ask Experts Questions for FREE Help !
Ask
    malachinz's Avatar
    malachinz Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 15, 2008, 06:25 AM
    240 volt to 120 v
    I'm looking at buying a few tools from america, which I understand run on 240 volts. I want to know if its possible to change it to 120volt by just changing the lead.

    Cheers:D
    revs007's Avatar
    revs007 Posts: 8, Reputation: -2
    New Member
    		  
    #2

    Feb 15, 2008, 06:44 AM
    You it is but u need to use a 240/120 transformer most of the device has a switch or jumper in it so 1st ask from the vendore
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #3

    Feb 15, 2008, 06:50 AM
    Most if not all power hand tools in USA are 120V, or cordless battery powered. I would say all hand tools are 120V, but if I do someone will find one that is not, just prove me wrong.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #4

    Feb 15, 2008, 07:18 AM
    Some charges to battery operated tools may have universal inputs (100-240 V). You would need to check the owner's manual.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bx or romex 240 or 120 [ 5 Answers ]

Replacing old bathroom fixtures in a 100 yr old house. Has old 2 wire bx and I want it on its own circuit. The supply comes in from another room to the ceiling box where it goes to another room and to the wall switch then from there it goes to the medicine cabinet. I want to have this room on its...

3 phase 208 volt/120 volt .load [ 1 Answers ]

I am trying to hook up a commercial espresso machine which has a 220 line. My existing electrical box is a 3 phase 208 volt/120 volt. Would this be sufficient to handle this?? Thank you

120 To 240 [ 1 Answers ]

I have a 100 AMP Pushmatic breaker box in my garage. It is full of breakers that are all 120 volt that ranger from 15 to 30 amp. I want to hook up a 240 amp for a pump motor and a one for a welder. Can I hook up two of the 30 amp 120 volt breaker to accomplish this with each one?

120 volt outlet from 240 volt outlet [ 1 Answers ]

I understand that it is possbile to wire a 120 volt outlet from a 240 volt outlet. My 240 volt outlet has 3 wires in, white, black, and a ground. Do I wire the 120 volt outlet from the either wire and the ground? My voltage meter indicates that connection is 120 volts. Is there any down side to...

Replacing a 240 volt outlet with a 120 volt oulet [ 1 Answers ]

We've switched to a central air conditioning system and no longer need the 240 volt outlet by the dining room window. The house was built in 1928, updated in 1957, and again a couple of ad hoc times thereafter. The wiring is at times very old, brand new or somewhat old. My guess is that the 240...

View more questions Search