Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Led says open limit switch
[ 9 Answers ]
I'm sorry but I don't know what brand of furnace I have. so here's the problem... a couple of days ago I noticed my furnace was blowing cold air so I went to check to see if the pilot was out... well I have and automatic ignitor. So I carefully followed the instructions for resetting the furnace....
Open Limit Switch on B18099-13. Help!
[ 6 Answers ]
I have a furnace with the B18099-13 control board. The fan blows constantly whenever power is applied. The status LED on the control board indicates "OPEN LIMIT SWITCH" Where are the two limit switches located? On board or off? Are there any tricks, quick-fixes, or "band-aids" for this...
Replaced open limit switch too many times.
[ 11 Answers ]
I have replaced the open limit switch on my furnace four times in the last four years. I just replaced it today, again and the furnace will not kick in unless I turn off the thermostat and restart it. After several attempts it will start, but will run fine a couple of times then I will do the...
Furnace is blinking 4 times saying open limit switch
[ 1 Answers ]
My furnace is blinking 4 times indicating that the furnace has an open limit switch. I changed the switch and it is still blinking 4 times indicating the same thing. What else could be wrong or what can I do to fix this problem? ITS COLD!!
Open limit switch indicator light
[ 1 Answers ]
I have a goodman furnace and just the other night I noticed the house wasn't heating, I checked the furnace and the indicator light suggested vent blockage checked the vent stack that leads to chimney and found 2 dead birds in stack removed them and started furnace, thought I had it fixed. All... View more questions Search
|