 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Laundry Tray Pump System connected to my wash tub in my fifteen year old townhome's basement. I was recently informed that it was not properly installed because I never connected the vent pipe from the pump. I had some one look at it and was told that the house's vent system (which...
I have a grinder pump that was installed when we built our house 14 years ago. It has been working properly however, we now notice excessive gurgling and an unusual odor in our finished basement.
I have a laundry tub installed in the basment. It drains to a sealed pump box. The pump inside discharges to the house drain above. The box is vented to the house drain also. About two feet upstream from where the discharge tees in. I suppose this has been working but the question is - is this a...
How do I wire my inline duct fan to my Goodman model gmp100-4 gas furnace fan so that the inline duct fan comes on and off when the furnace fan does? I understand that I need a relay from the inline duct fan but don't know where to connect the relay to the furnace.
I have a mobile home with the typical roof vents for sewage. After setup, the system is not draing properly. Everyone says I need another vent for sewage in addition to the one through the roof. Can I install one directly in the main sewage line, specifically near the clean out? If so, what exactly...
View more questions Search
|
