Ask Experts Questions for FREE Help !
Ask
    removemyignoranceplease's Avatar
    removemyignoranceplease Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 5, 2008, 01:22 PM
    Toilet Lead Pipe Drain? Any way out of replacing?
    Help, please.

    I am responsible for the pipes in my tiny co-op apt in the big apple... and want to the best for my neighbor below me - my toilet lead drain pipe (building is over a 100 years old) drain had a small leak - did my due diligence and have had 3 plumbers look at it. There is a small leak on the topside of this pipe - vertical section leading to main building drain which one of the plumbers sealed up with some plumbers putty and that has been fine for two weeks... but... there are small cracks in the lead pipe... no leaks yet in the cracked section.

    Two plumbers say replace the lead pipe. The other put on the putty and said wait on changing pipe - cost to replace: between $1200 to $1400 bucks for new cast iron pipe.

    Anyway around it? Now or later issue? Could the cracked piece be cut out and dresser couplings or mission bands be used between a new piece of cast iron? I live in New York City so I believe PVC is not legal here.

    Or is it bite the bullit time?

    At least the underdog Giants went the distance.

    Best,

    removemyignoranceplease
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Feb 5, 2008, 06:00 PM
    I hope the plumber used an EPOXY PUTTY to do that repair... if that is the case then that repair could do the job for quite awhile... but that is not what you asked.. so...

    Could you use clamps... yeah... maybe. But in the long run you will end up having to go back in and repair the section that the clamp clamps onto because lead is, well, old.

    I mean... no matter what type of repair you will need to open the ceiling... yes.. Then you will need to replace the ceiling, prime, paint, cleanup, etc. If plumbing work done is a patch.. well... maybe OK... may leak again in 3 months... so...

    I hate to say it, but invest in the big repair... do it once, do it right... you will not regret it... and you will not end up opening your neighbor's ceiling twice!!

    I hope this helped! Good luck.

    And hey... from a patriot's fan to a giant's fan... :p

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing Lead Toilet Drain Pipe [ 1 Answers ]

The soil pipe for the toilet in my bathroom is also connected to the tub and sink drains directly below the toilet. The sink drain leaks where it connects with the 4" lead drain pipe. The lead drain pipe then connects to a cast iron elbow. I want to replace the lead portion with PVC and also...

Replacing a brass closet flange on a lead pipe [ 3 Answers ]

Okay, so I'm renovating my bathroom and running into some issues with the old plumbing. Here is a link to some pictures of the situation which will do a much better job at describing things than I can. Picasa Web Albums - Jonathan - plumbing Obviously the ideal situation would be to...

Replace Lead Pipe from Toilet to Hubless Waste Pipe [ 3 Answers ]

My house is a craftsman style house from 1912 in Oakland, California. I have a big hole in a 24" horizontal lead pipe that bends at 90 degrees and connects the only toilet in the house to the hubless waste pipe. How do I go about removing the lead pipe? (What tools do I need and what type of...

Replacing a toilet flange with a lead connection [ 6 Answers ]

I am about to pull up my old toilet and take a close look at what's underneath. I am also going to go over the original plank sub-floor with fresh 3/8" ply (followed later with thin lauan for eventual linoleum) there is a visible floor patch from an old repair. Given the fact that there has been a...

Replacing lead pipe with pvc [ 9 Answers ]

The lead pipe and drain from my father-in-laws' bathroom is leaking and needs to be replaced. I'm tempted to just remove all of the lead (only a few feet) and cast iron all the way to the entry into the main discharge. Currently the 2 pieces of cast iron have a leaded seal. How do I connect...


View more questions Search