Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Light Kit for Ceiling Fan
[ 2 Answers ]
I just bought I Home Essentials ceiling fan from K-MART and I wired the fan portion just fine. The wires were nice and color coded Black to black, red to red, white to white and green to bare copper for the ground wire. I turned on the power and it works fine. When I shut the power back off,...
Ceiling fan/light
[ 9 Answers ]
I did away with the remote receiver and wish to use the wall switch only: I have a wall switch labeled "general purpose ceiling fan control - non solid state." Now this switch has one lever that operates the fan from off to high,medium, L1, L2. Below that lever is another lever that operates the...
Light kit for ceiling fan
[ 1 Answers ]
I just purchased a Harbor Breeze 52in. Helix II Ceiling fan. The light kit came with the fan. There are 5 G9 blubes that came with the light kit. My problem is that the fan works properly but the lights will not come on. The instructions say to "connect the black wire plug from the fan to the...
220v european wall light fixtures
[ 3 Answers ]
I would like to use an exterior wall light fixture bought in the US for 110v light bulb, in Europe. I was told the existing wiring is rated to take 220v and the light bulb socket is rated for 250v. Can I use this fixture in europe or should I change the light socket and wires with what is used...
220v 50a welder, 220v 30a dryer plug
[ 1 Answers ]
I just got an arc welder that is 220v 50a. I thought I could plug it into the 220v receptacle in my garage, not realizing how many different types of 220v plugs and amperages there are. The receptacle in my garage turns out to be a 220v 30a dryer plug. My question is can I just change the... View more questions Search
|