Ask Experts Questions for FREE Help !
Ask
    phil1340's Avatar
    phil1340 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2008, 12:23 PM
    Intertherm thermostat wiring
    I have a intertherm model no. M1MB 056A BW and have bought a hunter thermostat 44360 the intertherm thermostat has a green,red and white wire coming from the back of it and I am not sure where to put them on the hunter thermostat can anyone help me please ?:confused:
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 3, 2008, 01:37 PM
    You made a mistake to buy the Hunter thermostat. Get a Honeywell you will be much better off. Hunter is junk for the most part.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Feb 3, 2008, 02:30 PM
    You got that right,, I wouldn`t trade a good USED honeywell,, for 10 Hunter stats
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat Wiring - From Two to One Thermostat [ 4 Answers ]

Currently my central a/c unit is hooked up to a Honeywell CT3500 Programmable Thermostat. I've noticed that the thermostat can handle heat as well as cooling. My furnace is hooked-up to an older manual thermostat. It is a simple 2 wire set-up - red & white. Could the furnace be hooked-up to the...

Intertherm programmable thermostat [ 1 Answers ]

I have a Intertherm gas furnace with air conditioning. I would like to replace the intertherm thermostat with a programmable one. What one would be compatible with this system? Thank You

Honeywell wiring different from old thermostat wiring [ 2 Answers ]

I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!

Intertherm a\c won't shut off by thermostat [ 8 Answers ]

Need help! I have Intertherm furnace and a\c system model number MGH-100-ABWN-05 while the heat\a\c switch on the furnace is on A\C my thermostat can't control it. I have a electronic thermostat made by ritetemp (model number 8030C). I do have the RC terminal jumpered to the RH (r on the...

View more questions Search