 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Sears 1350 auger keeps turning.
When the right hand handle is depressed this starts the auger, however when it is released the auger keeps turning. There seems to a part of the impeller rod arm that prevents it from returning to the "off" position. Any Tips?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I just put on a new belt on the snowblower and now it flips over when engaging the auger and burns. What is wrong?
I broke about 3 ft. of 3/8 of an auger in basement floor 2" drain trap. I asked the local tool rental shop if they carried a retreival bit, but they didnt know what I was talking about. I looked in their bin of what was available, & didnt see it. Problem is, they were only available on a 1/4...
Have been doing the research but really I'm getting more confused: I am dealing with the following project/prospects:(A) Drilling into really hard wood (South American 'Greenheart' and Purple Heart'). Tried using ordinary twist bits which I was assured would be adequate and the lumber simply...
Hi there, I have an HP 1350 all in one printer that seems to work very well with one exception. When it was new I was able to print business cards on it in sheets of 10. Now for some reason the top margin will not remain constant. If I print a sample copy on a blank sheet of paper it seems to...
I would like to know how difficult it is to use a (rental) commercial sewer auger to clear a pipe that runs from the house (actually, from a clean-out installed when this was done several years ago by a professional "rotorooter") to the septic tank (which was pumped three weeks ago). I have had...
View more questions Search
|
