Ask Experts Questions for FREE Help !
Ask
    needhelpinmass's Avatar
    needhelpinmass Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2008, 11:06 PM
    Kenmore 110.23032101 spins some times
    My kenmore model # 110.23032101 spins sometimes and other times it appears to just lock up. I checked the coupling and looks to be in good condition. If I turn the drum manually in a clock wise direction it appears to get very tight, if I turn it counter clock wise it starts tight then releases to a free non friction type spin. I have the entire shell off washer to just check to see if maybe something got lodged between the drum and the plastic wall but all is clear. Any ideas on what I need to do? Thank you in advance for your help.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Feb 3, 2008, 09:28 AM
    If the coupler is good, thry turing the transmission in both directions by hand. It should turn freely in both directions. If it doesn't, it is locked and eill need replacing
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washer model 110.23032101 [ 6 Answers ]

I have a Kenmore Washer model 110.23032101 that does not spin out completely. It seems to spin but sometimes the clothes are still wet when the load finishes. We have replaced the motor and this has not solved our problem. Any suggestions would be appreciated.

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore Washer Spins/Rinses but Will Not Fill or Cycle [ 1 Answers ]

(Series 70) The washer worked fine until I had to replace the coupler between the motor and transmission. When I put everything back together and plugged it in it tripped the breaker. I had not properly replaced the wiring harness at the rear/top of the cabinet. After taking care of that, I...

View more questions Search