Ask Experts Questions for FREE Help !
Ask
    lipmanc's Avatar
    lipmanc Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2008, 02:58 PM
    Ability to control two zones from each of two locations.
    We have two zones for heat/ac with thermostats on first and second floor for those respective zones.

    I'd like to be able to adjust or override the second floor controls while on the first floor (or visa versa) or to adjust both zones from the same place.

    I would also like to be able to setback or reset both thermostats from our main entry/exit door (garage).

    I realize that if there is a solution (other than x10 type of controls), I will likely have additional wiring to run and I'm oka w/ that.

    Suggestions?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 2, 2008, 04:34 PM
    Its not only running the wire it is the major cost of going to a semi computer form of control.

    Call in a professional and tell them what you want to do then let them make suggestions.

    This can be done but usually the costs run for two systems and accessory ports about 7,500.00. If it was more than this I would get a second opinion.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ability with food [ 1 Answers ]

Scientists performed an experiment to determine whether there is a connection between learning ability and food. They took two groups of 20 mice each, all from the same purebred strain. The mice were deprived of food for 3 days and then given a standard learning session in running through a maze....

Multiple Monitors (required at different locations) connected to one CPU [ 2 Answers ]

I would like to connect multiple monitors to one CPU and be able to place these monitors at different locations on the shop floor. I would like these monitors to display the same image from the host computer. I would like to change/update information on a host/primary computer and have that...

Drain locations [ 5 Answers ]

I am moving the bathtub and toilet drains on my concrete slab and need to know the standard distances from the wall for each drain. I believe that the toilet drain is 12" but have no know idea as to what the bathtub would be. Thank you.

View more questions Search