 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bath water not hot
When I run the hot water in the bath tub, it starts hot but then becomes cold when the tub is about 1/4 full. The shower water is always hot, and we always have hot water from the other faucets. We have this problem with both tubs. We have a 50 gal. water heater.
|
||||
|
||||
|
If the water heater's electric I would shut the power off, open up the bottom inspection plate and check the bottom element with a ohm meter for resistance. If you have none the element's faulty and must be replaced. Let me know what you find. Good luck, Tom
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
There is no hot water in bath. Hot comes just for a second and then only cold water comes. Hot water comes in all other taps in the house.
A new water heater was installed yesterday, but I have no HOT water pressure in either of my showers. Is it the old fixtures, or a leaking pipes?
I have a single knob on my bath tub that controls the hot and cold water. When you rotate the knob a half way it is cold water and a full way it is hot water. The cold water comes out, but the hot water does not, just a drizzle. I removed the faucet and found there is one pipe coming out of the...
I have a single knob on my bath tub that controls the hot and cold water. When you rotate the knob a half way it is cold water and a full way it is hot water. The cold water comes out, but the hot water does not, just a drizzle. I removed the faucet and found there is one pipe coming out of the...
View more questions Search
|
