Ask Experts Questions for FREE Help !
Ask
    mawdeb's Avatar
    mawdeb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2008, 05:51 AM
    No water flow to shower head
    We have normal flow of water to our tub faucet, but no water flow to our shower head. What could be the problem?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 31, 2008, 06:34 AM
    Have you removed the shower head and turned the shower on? Still no water? What type of diverter do you have? Pull up on the spout or is it built into the valve? Let me know, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moen Shower Head - flow much too restrictive [ 3 Answers ]

Moen Castleby T2377CP Shower Trim The new shower head is restricting flow. Before I start prying, what I see is this: Just below the threads there is a green "ring" with a center slotted green circular piece and then below that there is the black plastic piece with the holes. Is this...

Increasing the water flow of a Moen shower head [ 5 Answers ]

I have just installed new bathroom fixtures, Moen brand. I have tried to increase the pressure of the shower head. I have taken out the O ring in the top and I have unscrewed the face of the head. I have not been able to remove the head or remove the plastic in the neck. I don't want to break it...

No hot water/low water flow when shower is turned on [ 1 Answers ]

My home was built in 2005, I have a shower/tub combo that has only been used once since it was installed. I recently had issues with hearing sucking/draining noise coming from the drain in this bath when toilet was flushed, I discovered the water in the trap had evaporated.. Easy fix! But when I...

Shower Head Very Low Flow [ 5 Answers ]

After replacing the rubber washers in the brass gerber valves (handles) and reassembling the handles, the water flow to the shower head was greatly reduced. The local lumber store didn't have all the washers and suggested I push plumbing string around the stem to stop the water from leak from the...

No flow from shower head [ 1 Answers ]

Because our shower pipe is too low for my 6' tall husband, I installed the Waterpik Flexible Shower Head which attaches and then snakes up to whatever height you like. So, it is in an S shape. To I also removed the water regulator because we have low water pressure here, and the directions said...

View more questions Search