Ask Experts Questions for FREE Help !
Ask
    RWMorris's Avatar
    RWMorris Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 30, 2008, 07:07 PM
    Our Frigidaire dryer is ruining our clothes!
    I have a Frigidaire Gallery dryer model GLER331AS2 that is ruining our clothes! A zipper, snap, or button occasionally find their way through a slot between the drum and the edge of the inside of the dryer, and gets lodged. When we open the door, that article of clothing is totally twisted and we are lucky when we can dislodge it with the zipper/snap/button still intact. Anyone know how to fix this?
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
    		  
    #2

    Jan 30, 2008, 10:24 PM
    There is a wear strip and plactic strip that the front of drum rides on

    Need to remove front cover and replace it

    New strip needs to be glued back in place needs to set for while to cure

    My daughter had this problem on her dryer -- now fixed
    PleaseHelpMeFixIt's Avatar
    PleaseHelpMeFixIt Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Feb 27, 2008, 04:46 AM
    Im no fix it person, but make sure (if you haven't already) you remove all the glue from the previous plastic strip. If you do not do this, it will not hold for very long.
    I had a repair man fix it once, not a year later (of course warranty was expired) this strip needed to be replaced again.
    It is VERY time consuming and a pain in the butt to scrape off the glue, but in the long run, it will be worth it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Frigidaire dryer [ 2 Answers ]

How do I replace the thermal limiter. I have taken the screws out of the clips, but can't get to the part. The top won't come lose.

Frigidaire dryer ruining clothes [ 1 Answers ]

We have a frigidaire galley dryer that was purchased 4/5 years ago. Clothes are getting stuck in the crack around the door that allows the drum to spin. It leaves marks and/or chews them up. Has anyone experiences anything like this or know how to fix it.

View more questions Search