Ask Experts Questions for FREE Help !
Ask
    jen78fl's Avatar
    jen78fl Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 29, 2008, 08:51 PM
    What type of insulation is used for dishwashers?
    Hi. I am hoping someone can help me. My husband just installed a Kenmore dishwasher. It is actually his parents old one, so I believe it's a few years old. It is model number 665 15891790. On the dishwasher it says kenmore ultra wash. Anyway, it comes with insulation that goes over the top and sides of the dishwasher. I am trying to find out what the insulation is made of. I am thinking its fiberglass since I have heard that dishwashers are usually insulated with this, but Im not sure. There are some tears in the insulation and I am concerned if this is fiberglass that particles of it could get in the air or on the dishes. I do have the part number for the insulation.. It is called sound shield, and the [part number is 3381229. I appreciate any help with this. Thanks for your time
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
     
    #2

    Jan 30, 2008, 12:37 PM
    Yes, the material is fiberglass. To be on the safe side if you like, you an use some duct tape and patch the part that is ripped. The fiberglass won't get into the dishes as the wash area is essentially sealed once you latch the lid and turn it on.
    jen78fl's Avatar
    jen78fl Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 30, 2008, 01:31 PM
    Thanks Twinkie
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
     
    #4

    Jan 31, 2008, 07:18 PM
    You're most welcome. Anytime.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dishwasher [ 2 Answers ]

My dishwasher won't start any cycles. I have noticed that the start button which usually lights up a steady green light once the cycle is set to begin is flashing green 7 times and does not begin to start the cycle. Is there any way possible to reset the control panel? :confused:

Kenmore dishwasher [ 1 Answers ]

Where is the pump impeller at on a dishwasher?

Kenmore Dishwasher [ 1 Answers ]

I have a Kenmore Dishwasher that will not drain the water.

Kenmore dishwasher [ 1 Answers ]

Just moved to a hard water location and the dishwasher heating element is caked with a hard gray crust. The dishes have white powdery deposit that can be wiped off. Is there a way to remove the deposit or do I need a new elememt?


View more questions Search