As to the bryant gaspack codes

tipe2 Posts: 5, Reputation: 1

New Member

Jan 26, 2008, 09:31 AM

As to the bryant gaspack codes

The error code said processor detected error in software or hardware. It has a code for flame sensor.

NorthernHeat Posts: 1,455, Reputation: 132

Ultra Member

Jan 26, 2008, 12:38 PM

Read FAQ's about flame sensors and clean it.

Add your answer here.

Check out some similar questions!

Bryant 373LAV trouble codes [ 2 Answers ]

My Bryant 373LAV appears locked out. The trouble code is 3 short and 1 long. The trouble code sticker is missing from the blower door. Can anyone identify the code's meaning?

Bryant Gaspack LED codes [ 1 Answers ]

I have a 588ANW048120 gaspac and the code led refers to the IGC error, I can reset the unit by cutting off main power and it comes on and works ofay for awhile then all of a sudden it does the same thing. Sometimes it will work OK for aday or two then again it may go and do it two times in one day....

Bryant furnace does not come on [ 3 Answers ]

We have central AC/Heating with separate Bryant heating and AC units that are controlled from the same thermostat in the house. When I turn the Heat ON and set Temp to way higher than current Temp, the light on the thermostat comes on but the heating unit does not go on... no sound of burners...

Bryant Burner [ 3 Answers ]

I have a valve on a Bryant Burner for an old gas furnace. There seems to be a problem with the gas valve that feeds the burner. Are 40 year old valves available? Thank you. Dennis

What are the Bryant 373LAV/376CAV Error Codes? [ 3 Answers ]

I have a Bryant 373LAV/376CAV Gas Furnace. I started having a problem with it and can't find the FLASHING LED ERROR CODES anywhere. After reading some of the answer in these forums I'm assuming the LED flashes x times short, then x times long for a 2 digit number. I'm getting a 3 short 3 long...