Ask Experts Questions for FREE Help !
Ask
    bestmom4366's Avatar
    bestmom4366 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 23, 2008, 10:04 AM
    Plumbing bathtub faucets
    I am tryingto get bathtub faucets off to adjust mechanism inside. There is no water coming out everything else has good pressure
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Jan 23, 2008, 01:29 PM
    One... two... or three handle setup? Sounds like a 2 or 3 handle tub/shower valve. Can you confirm? And you say no water coming out at all... no hot OR cold?? Is there a trickle at least?

    Get back to us ASAP and we will try to get you an answer on how to disassemble!
    bestmom4366's Avatar
    bestmom4366 Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 23, 2008, 03:12 PM
    2 handles. The water does trickle out but that's about it. Theses were put in just a couple months ago.toilet and sink both have great pressure. It looks like there a small hole in side to get to a screw of some sort. Ithought an allen wrench but it did not seem to work
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #4

    Jan 23, 2008, 03:15 PM
    Check again on the allen wrench.. there is standard sizes AND metric sizes.. *frown*... I am pretty sure you will need to find the hright size allen wrench and that will do it for you. Let me know what happens.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Loud water noise in bathtub faucets [ 15 Answers ]

I have two bathtub faucets that seem to create a loud noise from water flowing through the faucet. One in a Moen single knob mechanism with a shower. When the water is diverted to the shower head the noise is greatly lessened. The other is a Moen but with individual hot and cold handles. This...

Bathtub plumbing [ 1 Answers ]

How do I change the plumbing from a shower to a bathtub/shower?

Leaking faucets in bathtub [ 1 Answers ]

I have replaced the washers in the bathtub faucets... twice... and they still leak! What can the problem be and how do I fix it? Please help!

Plumbing in bathtub p-trap [ 1 Answers ]

We are in the process of replacing a bath tub, we pulled it out and noticed a piece of plastic pipe sticking out of the hole in the floor. It was sort of laying over. When we moved it, it just pulled up and it wasn't connected to anything. There was tons of dirt in the hole in the cement. How...

Bathtub faucets [ 5 Answers ]

When you install a faucet in a bathtub do you turn it in or out


View more questions Search