Ask Experts Questions for FREE Help !
Ask
    cedjess123's Avatar
    cedjess123 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 22, 2008, 08:59 AM
    Gas on, blower not
    When my unit is running and the gas is on the fan stops. What could cause this?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 22, 2008, 11:21 AM
    Sounds like your fan and limit control is out of calibration. Recalibrate or replace. If the motor is over heating and stopping it could be a capacitor of the motor itself.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower Always On [ 2 Answers ]

Hey guys, I have read all the various questions about blowers and a/c and auto and wiring. My furnace blower stays on all the time and I can't find a "Fan" switch anywhere. I see that I only have two black and white wires into my thermostat and gawd only knows what the limit switch looks like and...

Blower [ 2 Answers ]

My blower will not run it just makes a loud humming sound I'm sure I may need to replace it. And I know I can but I don’t know where to start to look for the part new or used

A/c blower [ 1 Answers ]

My central a/c stopped blowing. The outside unit is working but when the unit inside turns on all I get is a humming sound as if it wants to turn on but it does not.

Blower [ 5 Answers ]

Hello, I have a 15 year old gas fired furnace. I recently changed the old White-Rogers thermostat to a digital non-programmable one.. I connected all the wires (5 wires) White to white, yellow to yellow, red to RC, and Black to R, and green to green. The problem I'm having is being able to run...

Blower won't come on... [ 1 Answers ]

I have a York furnace and ac unit. The blower won't come on. :mad: The blower motor works I found that no power was going to the blower so I by passed it to stay on all the time. :cool: What I need to know know is what is causing it there is a Honeywell circuit board (ST9120b 1005)...

View more questions Search