Ask Experts Questions for FREE Help !
Ask
    cedjess123's Avatar
    cedjess123 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 22, 2008, 08:33 AM
    Adjusting fan limit switch
    The fan on my warn air furnace cuts on and off regardless of the functioning of the unit. In other words if the gas is off the fan will come on for no reason (well it's doing it for a reason but I don't know why). Also when the gas is on the unit is running normally the fan will cut off for a minute or so abd then turn back on. I know this is not normal operation. The fan limit switch was replaced recently and the unit has been running this way every since. From reading some of the questions and answers I think this may be the problem. If this does not sound like the problem to you please recommend something else.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 22, 2008, 08:41 AM
    Adjust in small increments.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...

Fan limit switch? [ 6 Answers ]

I am troubleshooting a Gas furnace. I am trying to eliminate the fan/limit control and a 24 volt electric controlled switch. I am getting 24 volts to the switch. I have replaced a thermostat for this unit. There is an auto/manual switch on the fan/limit switch. When this switch is in the manual...

Limit switch [ 1 Answers ]

What is a "limit switch" for a central heating unit? And is it expensive to replace?

Limit switch [ 1 Answers ]

My air conditioner's pan was full, we emptied it and now it won't cut on. Where is the reset button for the limit switch? Is there one? We can't find it.

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search