Furnace codes

prestonm Posts: 2, Reputation: 1

New Member

Jan 20, 2008, 09:18 AM

Furnace codes

I have a Coleman Evcon furnace in my modular home, the green light is flashing 4 times which is limit cycling how do I fix this ?

acetc Posts: 1,004, Reputation: 79

Ultra Member

Jan 20, 2008, 09:40 AM

Turn off or unplug and check your filter.

Add your answer here.

Check out some similar questions!

Goodman furnace trouble codes [ 4 Answers ]

I have a 5 year old goodman 92 that is giving me 5 blinks on the main circuit board. It goes through the start-up routine and after about three attempts the burners will stay on. What does that really mean?

Furnace codes--system lockout /check line clarity? [ 2 Answers ]

Our furnace is only blowing cold air and the blower will not shut off with the thermostat. The indicator light flashes 2 times-and the code thing says it means system lockout -check line clarity.:confused: The ignitors try to light but go out right away. Now it is flashing constantly meaning...

Nedd fault codes for Coleman Evcon Furnace [ 4 Answers ]

I have a Evcon furnace model DGAA056BDTB and the cover plate for the controls box is missing. I am told that the fault codes were on the back of the plate. Where can I get a replacement cover or at least get the fault codes for my furnace?

Anyone know the diagnostic codes for a goodman furnace? [ 3 Answers ]

Hi, I have an older model goodman furnace that powers up the vent fan and proceeds far enough in the sequence for the electric igniter to glow, but then never releases gas to complete ignition. I replaced the gas valve last year, so I am hoping it isn't this again. I am getting an error code on the...

Goodman Furnace - Won't Light, No Codes [ 3 Answers ]

Eleven year old Goodman gas furnace. The main vent blower will start, but that's where things end. The draft inducer motor doesn't start and nothing else in the chain obviously happens after that. The LED on the board stays red and never flashes any codes. I checked the voltage coming into...