Ask Experts Questions for FREE Help !
Ask
    gerrie151's Avatar
    gerrie151 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 19, 2008, 10:41 PM
    Direct vent wall furnace efficiency
    I just had direct vent wall furnace installed - should the floor be very cold when it is not running
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 20, 2008, 12:21 AM
    Yes it could be cold depending upon how it was installed. Call back the company that did the work and complain.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace efficiency [ 1 Answers ]

I have a Concord hi efficiency furnace (125 BTU). It is piped with 3-inch supply and 3-inch exhaust rather than the 2-1/2 inch as recommended in the installation manual. Will this affect the efficiency?

Installing direct inline sewage vent [ 1 Answers ]

I have a mobile home with the typical roof vents for sewage. After setup, the system is not draing properly. Everyone says I need another vent for sewage in addition to the one through the roof. Can I install one directly in the main sewage line, specifically near the clean out? If so, what exactly...

Trane direct vent gas furnace [ 1 Answers ]

I have a trane direct vent gas furnace/cooling system that has been making a very loud noise when it turns on coming from the side where the pilot flames are. Sounds like it comes from the air return vent. Heat works fine, just worried about the noise, if it's dangerous.

Direct Vent [ 1 Answers ]

I just installed a direct vent wall mount furnace. When ever the wind blows the pilot light goes out. Is there anyway to correct this matter? There was nothing in the installation guide nor information from the company that I purchased this from that informed me that this could be a problem. ...

View more questions Search