 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Changing shower faucet
I have a 1989 mobilehome with original hardware, both shower faucets are broken, no man around so I do repairs if I can myself, am buying new onepiece and need to know do I need to turn off water to house before I attempt to do this? Also any tips would be appreiciated. Thanks
|
||||
|
||||
|
For sure turn water off, sometimes theirs shut off valves, not sure about the shower since a lot of times there behind the wall,But when ever doing plumbing its good to shut the water off to what your working on, if no shut off valves need to shut off main water to house.The sight labeled Shower Plumbing looks pretty good on the little subtittles below.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you
I need to replace a shower faucet. I have replaced sink faucets before. How do I go about it and is it very difficult. The area I need to know is behind the shower.
Are water suppressors needed in the bathroom sink faucet and the shower stub out also? And can you just use a length of pipe on a T, or must you use those copper chambers? (cpvc system) thanks
Ok, after you are all done laughing at a helpless woman, maybe you can answer this. :confused: Which way do you turn the wrench to remove an old shower head? Left or right?
How do you know what rough in pipe size (for your new valve)your shower is without opening the wall. My house is 7 years old. There is a bathroom next to it as well.
View more questions Search
|
