Ask Experts Questions for FREE Help !
Ask
    ShakeyDave00's Avatar
    ShakeyDave00 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 14, 2008, 05:20 PM
    Filters for Goodman furnace?
    This past weekend we had my BIL (a certified HVac installer) come out and replace our old Lennox furnace (it was installed when the house was built, 22 years ago) he installed a Goodman furnace.

    My question is this, does this type of furnace use a filter? If so, where do you install it?

    Bonus question!

    Does anyone else who has this type of furnace have an issue with the noise? It sounds like a jet engine taking off!

    We have heat, and it does not run long, so no complaints, just wondering about the large amount of noise~
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 14, 2008, 05:28 PM
    Your installer should have instructed you on the filter and show you where it is. They all need filters ,I`ve not had a complaint about noise,, is it coming from your fresh air return ? Could be the lack of a filter is causing the louder noise.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Electric furnace filters [ 1 Answers ]

Electric furnace filters anyone tried tot put on into a old furnace... I have a weather maker 8000 and I would like to put ia electric furnace filter can anyone suggest were to go to get one??

I have a Goodman gas furnace. [ 2 Answers ]

I have a Goodman gas furnace approx 6 years old. When we turn the unit on at the thermostat the ignitor will glow red but the pilot is not coming on. I have replaced the flame sensor. Any suggestions? The LED was flashing 1 blink for possible ignitor or flame sensor but has sense quit flashing. ...

Goodman furnace [ 1 Answers ]

I would like more info about Goodman furnaces. I just had a man look at my old furnace and give me a bid of $1,450.00 to take out the old one and install a Goodman 80% and bring the old piping up to code. Thanks... jorjee

Goodman furnace [ 17 Answers ]

I have a goodman furnace. Forced air. No a/c. I turn the power on and she starts. Thermostat is off. No wires are crossed that are visible. The pilot does not ignite but the heating element is on. No gas seems to be coming through. Any suggestions? The furnace is only a year and a half old.

View more questions Search