Ask Experts Questions for FREE Help !
Ask
    Crankbearing's Avatar
    Crankbearing Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 13, 2008, 10:07 PM
    Water pump
    How do I replace the water pump on a 1994 plymouth voyager? v6
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Jan 14, 2008, 08:17 AM
    Allow the vehicle to completely cool. Overnight is best.
    REMOVAL

    1. Drain Cooling System.
    2. Remove Accessory Drive Belt.
    3. Remove right front lower fender shield.
    4. Remove pump pulley bolts and remove pulley.
    5. Remove pump mounting screws Remove pump.
    6. Remove and discard O-ring seal.
    7. Clean O-ring groove and O-ring surfaces on pump and chain case cover. Take care not to scratch or gouge sealing surface.

    Name: 1A.gif Views: 246 Size: 11.3 KB

    Installation is just the reverse of that.
    Torque pump fasteners to12 Nm (105 in.lbs.) This is not a lot of torque.
    Replacing the thermostat and gasket at the same time is recommended.
    Refill the system and inspect for leaks.
    Acquire cold beverage.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Increase Hot Water Pressure w/Water pump? [ 3 Answers ]

Would a Watts Premier Hot Water Recirculation Pump (http://www.costco.com/Browse/Product.aspx?prodid=11026121&whse=BC&topnav=&cat=&s=1) (or any other brand name) help to increase hot water pressure if you install it directly to the hot water output pipe and then turn it on ONLY while taking a...

How do you get water from a shallow well when pump will not suck water. [ 3 Answers ]

I have sunk a shallow well, (it does have water). I purchased a new pump. The pump does not suck water. I have primed the pump several times it does not want to suck water from the well. What do I need to do to obtain water.

Well water pump [ 2 Answers ]

Woke up this morning and had no water. The pressure gage on pump tank reading 0 pressure. How do I go about primeing the pump? Do I need to leave a faucet on in the house as I do this?

3-way water pump [ 2 Answers ]

I have been told that my central air conditioning unit needs a new Honeywell 3-way water pump. The technician who evaluated my unit has rigged it so that the valve is now open all the time and I am able to have ac. This was a temporary measure until he could return with the new valve. He has...

AC Water Pump not sending water through tubing [ 1 Answers ]

My house is a ranch house with no basement. We have a forced air/central air conditioning system. There is a pump that is suppose to pump the water through a plastic tubing in to our laundry tub. The water does have to go up to the ceiling of the room and across a wall and then down into our...

View more questions Search