Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Mold behind wall in Shower..
[ 3 Answers ]
We bought a upper townhouse 2 years ago. The onsuite has a shower. It is tiled on the floor and walls, with a glass door that opens up. There is also a 6 inch step to get into it. When we bought it looked liked clean and there was relatively fresh cauking all around the shower. We have always...
Running in wall Coaxial Cable from Existing wall
[ 7 Answers ]
Hi there, Is there someone here who is expert on electrical? I need help on running coaxial cable to my existing walls. I have a 1st floor where I have access to drilling holes into the second floor. I am willing to cut open holes for installing the single gang boxes. Now, here are my...
How to support a load bearing wall, need engineer, cement wall
[ 3 Answers ]
I want to remove about 6 feet from an interior wall. The rafters run parallel with the wall but the reason I think it's load-bearing is because one of the trusses rests on the middle of the wall with a lateral x across it. I have existing pictures and a drawing of "the existing" and what is...
Installing half wall in load bearing wall
[ 3 Answers ]
We are attempting to make our kitchen open concept with our living/dining room by creating either a half wall or putting in a window (what is the correct name for that?) The wall is load bearing. Do we need a permit for that type of reno? What would be a realistic budget to set aside for that...
Mold on outside cinder block wall
[ 2 Answers ]
I have black mold growing on my outside cinder block wall sourendering my back yard. I live in Las Vegas so the climate is dry but watering the lawns is causing the mold to grow since we have to water in the evenings so the water does evaporate so fast due to the hot climate. How do I remove this... View more questions Search
|