Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing Honeywell RTH7000; where does the X1 go?
[ 7 Answers ]
Ok here are all the details. I started with a White-Rodgers Thermostat Type 1F58W-72 and bought a Hunter Set & Save Programmable Thermostat Model 44155C. I took the old one off and labeled all the wires for the new one according to the instruction. It all went well until I realized I had one...
Wiring Thermostat Honeywell 8320U to Furnace-heat pump Trane XE78+XE1000 Combo
[ 4 Answers ]
Hello, I have the following systems, each set is functional and individually controlled by two separate Trane Weathertron BAYSTAT240 thermostats. Set 1: Trane Weathertron: BAYSTAT240 Heat side Trane XE78: TUD080C936A1 (Date: 02/1993) Cooling side Trane XE78: TXCO36C4HPB0 (date H06) Heat...
Honeywell TH8320 to Trane XL80 wiring
[ 1 Answers ]
Hi, I have Honeywell TH8320 thermostat which I'm trying to connect to Trane XL80. My problem is that it's 2H/1C system with no heat pump but all TH8320 wiring diagrams only show either 2H/2C or 1H/1C. So I got a bit confused. I'd appreciate any help. Thanks!
Honeywell Rth7000 Thermostat
[ 5 Answers ]
I just bought a honeywell rth7000 thermostat, i am installing in a old house that only uses 2 wires, one is green and the other brown, can anyone advise me how to connect these 2 wires to this unit i am not sure exactly where to connect them to on the honeywell thermostat--thanks
Trane Heat Pump tstat replacement with Honeywell prog - wiring question
[ 1 Answers ]
I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -... View more questions Search
|