Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing Honeywell RTH6300B from an older 7 wire Honeywell. PROBLEMS
[ 4 Answers ]
Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...
Hard wire 3 wire to 4 wire 220 service
[ 1 Answers ]
How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?
Hard wire 3 wire to 4 wire 220 service
[ 2 Answers ]
How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?
Ceiling Fan 2 wire switch problems
[ 3 Answers ]
I have a Hunter ceiling fan, it was installed about 8 years ago. The fan has 2 pull chains, one for the light and one for the fan as well as a direction switch all located on the fan body. Recently the switch at the wall has been acting up, turning on by itself and off by itself, especially...
3-wire home, 3-wire fan, 2-wire remote
[ 9 Answers ]
Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white).... View more questions Search
|