Ask Experts Questions for FREE Help !
Ask
    had8nuf's Avatar
    had8nuf Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 28, 2007, 04:25 PM
    Plumbing conversion
    I currently have a cast iron pipe in my half bath that is currently used to "unplug" the pipes. This pipe sticks out of the floor about three inches. I want to find an adapter that would allow me to use the drain for a bathroom sink connection to PVC.

    The problem with the current pipe is the corrosion and lots of it. There were internal threads. These threads are now a massive corrosion. The id of this mass is about 2.5" to about 2.75".

    Any suggestions?

    Thanks... Bonnie
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Dec 28, 2007, 04:29 PM
    Bonnie, sounds bad to me. If you have a pipe coming up out of your drain system, and it is open, it is allowing sewer gases to enter your home. This is not healthy. Yes you could get it converted with if nothing else a rubber boot connection that goes from the od of the pipe to the od of the new drain line.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Conversion from B2 to F1 while still in US [ 3 Answers ]

Hi, I am in US on B2 Visitor visa - I would like to study here and apply for F1 - is that possible while I am still in US - would I have to go to my home country or Canada for F1 stamping? Will it be an issue or complication when re-entering again? Please advise

Conversion [ 1 Answers ]

How to convert newton to kilogram?

Conversion [ 3 Answers ]

I am currently in chapter 13th bankruptcy, and I need to convert over to chp. 7 and I talked to some lawyers and they are charging too much. Is there a how to do it yourself answer out there.

View more questions Search