Ask Experts Questions for FREE Help !
Ask
    Renegar's Avatar
    Renegar Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Dec 27, 2007, 12:26 PM
    How to wire from Janitrol HPT 18-60 to a Hunter 44360
    Help! My Son bought me a Hunter 44360 for Christmas. I have a Janitrol now I sure could use some help with the wirring.
    The Present Janitrol is wirred:
    Y to Yellow wire
    G to green Wire
    R to Red Wire
    O to Orange Wire
    W2 and E are jumpered to the Wite Wire
    C to Blue Wire
    The New Hunter has these contacts:
    G
    RC
    RH already came with a jumper to RC
    Y/O
    W/B
    Y1

    Can you plese tell me how to wire this?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 28, 2007, 10:11 PM
    1st thing I would do is go trade the Hunter for a good thermostat,, most hunters are junk,(my findings)
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Dec 28, 2007, 10:16 PM
    Please refer to the beginning of this board. See the sticky notes for wiring colors and the conversion of the letters.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing a Janitrol thermostat with a new programmable Hunter model 44360 for single [ 3 Answers ]

-------------------------------------------------------------------------------- I would like to know about replacing a Janitrol thermostat with a new programmable Hunter model 44360 for single stage heat pump with emergency electric backup. The terminal labels on the janitrol are : Y, G, R,...

Hunter 44360 thermostat to a johnson [ 3 Answers ]

We hooked all the wires except blue, black, and brown and are A/C still ont kick on? We have Green -g Red- rc Rc-rh Yellow-y/o White-w/b Orange-y1 Is it hooked up right and our compressor is just shot?

Thermostat installation: Honeywell CT87 to Hunter 44360 [ 1 Answers ]

I live in an apartment and I have gas heated forced hot water. The old Honeywell has only 2 wires, not labeled. I am installing Hunter 44360 programmable. I don't know where to attach the two wires. Would appreciate help! :) 4843 4844

Hunter 44360 Wiring [ 2 Answers ]

Ok, I have searched and could not find my answer. I tried putting in the 44360 programmable today and can't get any cool air. It's a heat pump, all electric. Here's what I had: White - Y2 Brown - C Orange - W2 Blue - W

Honeywell T8411R to Hunter 44360 Thermostat [ 3 Answers ]

I have been pulling my hair out trying to get this to work right. The Honeywell is wired: G... Green C... Blue R... Red W1 and Y... jumped together L... empty W2 and E... jumped together

View more questions Search