 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Directional signal socket has no voltage
In the 2003 toyota echo. The right rear socket has no voltage. Maybe a ground wire
Is loose. I wonder how the auto shop is going to find, why the voltage is not Getting to the socket.(new bulb)( voltage tester) all the rest of the lights work okay. No voltage coming into the socket contacts. But Why? The right directional signal fuse is in a circuit, where the rest of the lights work. The bulb too also acts as a hazard light. Which doesn't work either. |
||||
|
||||
|
First, check all under-dash and under-hood fuses with a test light or multimeter:
https://www.askmehelpdesk.com/cars-t...tml#post252145 Next, check for voltage in the socket with a test light or multimeter. Look for obvious corrosion and then start performing continuity checks on the circuit. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We have a room that had a 2 wire socket, originally installed, and a three wire socket that was changed from a two wire socket by myself, called "Socket A". Recently an electrician installed two small fans in the same room and changed the 2 wire socket "Socket B" into a 3 wire socket. He did not...
Right rear directional light will not function. New bulb, used left interchangeable socket still not working. Hazard lights all work except the right rear direction socket. Voltmeter shows no current. Check wires. Where does this socket get its current from??
On my 2003 toyota echo. The directional signal on the right side is faulty. New bulb. The right rear turn signal does not come on. With the headlights On the bulb lights, but does not flicker. The sockets are interchangeable. So I tried the Left socket. Still did not work. Right side...
I received a fan/ light combo from a family member that had a broken pull chain for the fan. I replaced the pullchain switch. I figured out most of the wiring except for one extra wire. On the directional switch, the white wire goes to neutral group but the grey wire is not tied in anywhere. My...
View more questions Search
|
